Powered By

JAYTWO77

Monday, February 25, 2008

XM312 / XM307K50 : .50 Caliber Lightweight Machine Gun



Weight:
35 pounds (16 kg) max. (weapon only)
53 pounds (24 kg) max. (ground mount system).
Dimensions: 9.9W x 7.2H x 61.5L max. inches (25.1 mm x 18.3 mm x 1562 mm)(52.5L, 1334 mm) charged).
Portability: Man portable or vehicle mountable.
Stability: Up to 18 inch (460 mm) tripod height.
Operation: Currently a hybrid gas & recoil operating group. Gas powers the bolt mechanism while recoil drives the barrel/barrel extension and the feed system. Design changes are underway to eliminate the gas system totally to provide increased reliability and reduced complexity.
Environmental: Operationally insensitive to conditions.
Reliability: 6,000 MRBF (threshold) / 10,000 MRBF (objective).
Rate of fire:
260 shots per minute (4.3 hz)(cyclic).
40 shots per minute (0.7 hz)(sustained, without barrel change). In Burst of 5 to 7 rounds, the same as the M2HB.
Dispersion: Less than 1.1 miliradian, one sigma radius.
Range: Lethal and suppressive out to 2,000 meters.
Ammunition: .50 BMG M33 ball, M8, M20 & Mk211 API, M903 SLAP.
Recoil: 300 foot-pounds (407 J)(similar to the 7.62 mm M240).
Feed system: Weapon-mountable ammunition can or feed from any can using bellmouth attachment. M9 rear stripping link - common with current M2 ammunition. Left hand feed, right hand eject of cases and links.



The XM312 is a modern heavy machine gun chambered for the 12.7 × 99 mm NATO cartridge which is derived from the XM307 25 mm autocannon. It was designed in response to a request by the US military for a replacement for the aging M2HB heavy machine gun, and as a complement to the heavier XM307. It is quickly capable of being converted to an XM307 with a small number of parts and a few minutes of work at the unit level (and vice versa from the XM307). Procurement of the XM312 will allow easier use of the XM307, as only the related kits would have to be adopted. Two years ago field testing began with the XM312, but the test results were not encouraging because of the very low rate of fire of only 260 rounds per minute, so it is unlikely the XM312 will enter service with the U.S. Military.

The XM312, formerly known as the XM307K50, is a lightweight .50 caliber (12.7mm) machine gun being developed by General Dynamics to provide support for US Army objective forces. It features increased accuracy, effectiveness and lethality over current machine guns.This item can be converted to a 25mm grenade launcher taking less than 5 minutes and changing 6 parts. In fact, the XM312 machine gun is a derivative of the XM307 25mm grenade weapon system being designed for the US Army Objective Force.

XM307 ACSW Advanced Crew-Served Weapon / automatic grenade launcher


The XM307 Advanced Crew Served Weapon (ACSW) is a developmental 25 mm belt-fed Grenade Machine Gun with smart shell capability. It is the result of the OCSW or Objective Crew Served Weapon project. It is lightweight and designed to be two-man portable, as well as vehicle mounted. The XM307 can incapacitate or suppress enemy soldiers out to 2000 m or 2200 yards, and destroy lightly armored vehicles, watercraft, and helicopters at 1000 m or 1100 yards. There is currently no projected IOC for the XM307 and it is unlikely it will ever enter service with the U.S. Military.

The system is under development by General Dynamics Armament and Technical Products for the U.S. Army Tank-Automotive and Armaments Command (TACOM). As a part of the Small Arms Master Plan (SAMP) program, it is intended to either replace or supplement the Mk19 automatic grenade launcher and the M2 heavy machine gun. It fires 25 mm point-detonating and air burst style ammunition, including HE, HEAT, and thermobaric grenades at a cyclic rate of 260 rounds per minute and has an effective range up to 2 kilometers.

The primary advantage of the XM307 is its attenuated recoil system. The weapon controls recoil to a degree that a large tripod and heavy sandbags are not required to effectively employ this weapon. Because of this reduced recoil impulse and light weight, other mounting options are also possible such as small unmanned vehicles and aircraft. Its airburst rounds also make it much easier to hit enemies behind walls that could cause collateral damage if thoroughly shot through. They do not have to shoot through the wall, just through a window or over the top and kill the people behind the cover, leaving the structure of the building intact. Also, in under 2 minutes, it can be converted into the XM312, a .50 cal version for infantry and light anti-armor support.

XM307 Advanced Crew Served Weapon is gas operated, rotating bolt locked weapon that uses differential recoil system for decreased peak recoil. XM307 is belt fed weapon that fires from open bolt. The differential recoil system means that barrel and bolt group are allowed to recoil within the receiver casing together, against the recoil springs. When weapon is cocked for first shot, bolt is locked open and the entire barrel/bolt group is carried rearwards and also locked there. Upon the pull of the trigger both barrel group and the bolt inside it are released, and the bolt loads the round and locks it in chamber while barrel still moves forward; firing pin is then released immediately, and the recoil from the discharge first has to arrest the forward movement of the barrel group, and then throws it backward with less force than it would in the traditional system with fixed barrel. The belt feed and bolt cycling are operated by conventional gas action. The fire control unit includes zoomable day and night vision channels that output the sight picture to the small display at the rear of the sight. Integral laser range-finder allows for precise range measurement, necessary for automatic point of aim correction and for programming of the air-bursting fuzes. XM307 weapon is fitted with dual, ergonomically shaped spade grips with triggers and fire and sight control buttons. Additional buttons are located at the rear of the sight / fire control unit, below the eyepiece. In standard applications, XM307 can be used either on lightweight infantry tripod, or on vehicle mounts, manually or remotely controlled. For vehicular applications, GDATP will develop the dual feed option, which will allow to select the type of ammunition (anti-personnel HEAB or armour-piercing) at the instant before firing.

XM8 Lightweight Assault Rifle


Type: Assault rifle
Place of origin: Germany, United States
Production history
Designed: 2002
Manufacturer: Heckler & Koch
Produced: 2003–2004 (prototypes only)
--------------------------------------------------------------------------------
Cartridge: 5.56x45mm NATO
Action: Gas-operated, rotating bolt
Rate of fire: 750 rounds/min
Muzzle velocity: 920 m/s
Feed system: 30-round detachable box magazine, 100-round C-Mag drum magazine
Sights: Unmagnified reflex sight (4x for DMR variant)

The US Army's purpose in contracting for this prototype weapon was to provide replacement options for the venerable M16 rifle after the XM29 program ran into problems. The Army's goal was a weapon that was cheaper, lighter, and more effective than the M16 and M4 Carbine series of weapons. The XM8 was not just one weapon, but a system which could be reconfigured with appropriate parts to be any one of several variants from a short-barreled personal defense weapon to a bipod-equipped support weapon. It also included an integrated optical sight and IR laser aiming module/illuminator.

The XM8 was based on the kinetic energy module of Alliant Techsystems's XM29 OICW project, of which the weapon mechanisms were the responsibility of H&K. Following the indefinite delay of the Objective Individual Combat Weapon program, the U.S. Army requested that the contractors design stand-alone weapons from the XM29's kinetic energy and high explosive modules.

The first 30 XM8 prototypes were delivered by November 2003 for preliminary testing. Later, at least 200 developmental prototypes were procured. Among the complaints during testing were too low a battery life for the weapon's powered sight system and some ergonomics issues. Two other key issues were reducing the weapon's weight and increasing the heat resistance of the hand guard, which would start to melt after firing too many rounds. The main testing was largely completed, and the Army pushed for funding for a large field test. However, in 2004 Congress denied $26 million funding for 7,000 rifles to do a wide scale test fielding of the XM8 in 2005. At the time the rifle still had developmental goals that were incomplete, primarily associated with the weapon's weight; the battery life had been extended, and a more heat-resistant plastic hand-guard added. The earliest product brochure lists the target weight for the carbine variant at 5.7 lb (2.6 kg) with the then current prototype at 6.2 lb (2.8 kg). The weight of the carbine prototype had since grown to 7.5 lb (3.4 kg) according to a brochure released by HK and General Dynamics in January 2005.

During the same period, the Army came under pressure from other arms makers to open up the XM8 to competition. The main argument was that the weapon that was being adopted was a substantially different system than for the original competition that ATK and H&K had actually won (see XM29). Other issues were that the Army has a legislated obligation to prefer U.S.-based manufacturers, and that a previous agreement with Colt Defense required the Army to involve Colt in certain small-arms programs. The XM8 program was put on hold by the Army in 2004. The exact reason why this happened is a matter of debate; some combination of the aforementioned technical issues, funding restrictions, and outside pressure being involved.
In 2005, the Army issued a formal Request for Proposals (RFP) for the OICW Increment One family of weapons. This RFP gave manufacturers six months to develop and deliver prototype weapons with requirements very similar to the XM8 capabilities, but with the addition of a squad automatic weapon (SAW) configuration. Currently, no XM8 prototypes have been shown that actually match the capabilities of the M249 (e.g. fast barrel replacement, high sustained rate of fire, belt feed). The OICW Increment One requirement for the SAW includes fast barrel replacement and high sustained rate of fire, but leaves the ammunition feed choice up to the manufacturer.

Funding for the XM320 grenade launcher, which is a single-shot under-barrel grenade launcher similar to the M203 that was originally intended for the XM8, was approved. The launcher is actually heavier than the M203, but does offer some advantages. The XM320 was designed for use with the existing inventory of M16s and M4s and is also compatible with the XM8. It can also be used as a stand-alone weapon.

As of July 19, 2005, the OICW Increment One RFP was put on an eight-week hold, with an indication given that the program was being restructured as a joint procurement program including the Army and unnamed other branches. On October 31, 2005, the OICW Increment One RFP was canceled until further notice.

In an article in Jane's Defence Weekly, April 26 2006 (Vol 43, page 30) we learn that "The US Army has again delayed the procurement of its future infantry weapons, this time for more than five years, and is working to field two interim guns in the meantime."


Technical characteristics and variants

For much of its life, four different models were proposed: a compact PDW (personal defense weapon) with a 9.5 inch (241 mm) barrel, a carbine with a 12.5 inch (318 mm) barrel, and sniper and automatic rifle variants with 20 inch (508 mm) barrels. In addition, accessories such as optical sights, a grenade launcher, and a bipod were integrated using a new system which allows for precision attachment (so that, for example, scopes do not have to be readjusted each time they are attached). Like the M4 and M16, the XM8 was chambered for the standard 5.56 mm NATO round and was normally equipped with a 30-round plastic box magazine. However, this magazine was not compatible with M4 and M16's metal STANAG magazine. A 100-round dual drum Beta C-Mag style magazine would have been used, as well.

One of the XM8's unique features was its modularity. In addition to attachments mentioned above, this modularity allowed for quick repairs, barrel length changes, and even caliber changes in the field. Along with its basic components, the XM8 would have complemented the XM29, with such features as identical accessory mounts.

The number and type of variants in the family varied over its lifetime, this overview with three main versions is based from a press release in the early 2000s.

XM8 Carbine with XM320 grenade launcher

XM8 Compact Carbine: 9 in (229 mm) barrel, PDW configuration, folding stock or buttcap.

Automatic Rifle / Designated Marksmen: heavy 20 in (508 mm) barrel, integrated folding bipod, 4X sight, 30/100 round magazine


Characteristics and Features

Materials and Weight
The materials used to build the XM8 are almost entirely composites — with the notable exception of the cold hammer forged steel barrel. Preliminary tests in desert and Arctic conditions have shown XM8 to be a rugged weapon, though some complaints arose. It is reported to be capable of firing 15,000 rounds without cleaning or lubrication and up to 20,000 rounds before barrel replacement. The M16A2 needs to be cleaned often, and has a barrel life of approximately 7,000–8,000 rounds.

Much of the cost and weight savings, not all of which have actually been achieved in the current prototypes, are from the weapon's electronic sight. The sight is much more than a 1.5x red dot scope, including IR lasers and pointers as well. The baseline XM8 carbine (with its integrated sight), for example, can be compared to an M4 carbine with a host of previous-generation electronic add-ons like the AN/PEQ-2, M68 CCO, ACOG, and/or BUIS. Without the advantage of the next-generation combined electronics sight, the XM8 would be both heavier and more expensive than the firearms it is intended to replace. The XM320 grenade launcher intended to be used with the current M4/M16 firearms as well as the XM8 family, is heavier than the M203, but does include feature enhancements.

PCAP and MIL-STD-1913
XM8 abandons the standard MIL-STD-1913, for attachment of weapon accessories, in favor of a new standard referred to as PCAP (Picatinny Combat Attachment Points), small oval holes on the forward grip. (A variant was designed with MIL-STD-1913 rails — XM8 R — and some early XM8 prototypes had rails.) PCAP is not backwards compatible with currently fielded attachments that use MIL-STD-1913 rails without using an adapter. The benefit of PCAP, however, is the precision of the accessory's connection with the body of the weapon; accessories utilizing MIL-STD-1913 rails often need adjustment if they are removed and reattached. Additionally, most standard accessory functionality is built-in to the XM8. Where functionality was missing, it was anticipated that accessories would be redesigned to utilize PCAP. In the new OICW Increment One competition, the Army has left the choice of attachment technology up to the manufacturer, with requirements built into the RFP as to the ability of sights to maintain their zero.

XM29 Integrated Air Burst Weapon

The Objective Individual Combat Weapon (OICW) is the lethality element of the Land Warrior program. It is also planned to be fielded as a stand-alone system. The OICW, designated as XM29 by the US Army, is a developmental infantry weapon system that will revolutionize the close combat fight by substantially improving the infantry soldier's effectiveness. The XM29's unique, full-solution target acquisition/fire control system combined with precision 20mm air bursting ammunition provide a significant overmatch capability against today's threats, resulting in a dramatic increase in soldier survivability. The XM29 is one of the premier programs within the new Program Manager Soldier Weapons Office in the Program Executive Office Soldier Systems.

The XM29, developed by Alliant Techsystems and H&K, fires special air-bursting projectiles and standard 5.56mm ammunition. As of 2005 the XM29 was still is too heavy and unwieldy for Army requirements. Instead of scrapping the XM29, the Army decided to perfect each of XM29's components separately, so soldiers can take advantage of new technology sooner. The parts would be brought back together when lighter materials become available.

XM29 is an integral part of the Land Warrior system and, as such, will provide a tremendous enhancement in tactical and operational capability when fielded. The XM29 also is planned for introduction into the Objective Force as an individual system for both the Future Combat Soldier and the Objective Force Warrior. In the Objective Force, it will be linked to a networked battlefield environment, further benefiting the overall force capability.

The XM29 has a dual semi-automatic over and under configuration capable of firing 20mm air bursting ammunition or NATO standard kinetic energy 5.56mm ammunition. Both weapons are magazine-fed, providing the combat soldier an operational firepower advantage over current single shot systems. The full-solution target acquisition fire control has a laser range finder, direct view optics, integrated thermal imager, ballistic computer, fuze setter, environmental sensors, and compass. The precision 20mm ammunition includes High Explosive Air Bursting (HEAB) and Target Practice (TP) variants. The system has been demonstrated at ranges two to three times the current 40mm system to accurately deliver an air burst one meter over the lased target on the first shot fired.

The XM29 Integrated Air Burst Weapon will replace selected M16 rifles and M4 carbines. The modular, dual-barrel XM29 will combine the lethality of the 25mm family of munitions and 5.56mm NATO ammunition with a full-solution fire control to effect decisively violent and suppressive target results and to greatly improve small arms performance. This fire control will incorporate a laser rangefinder, ballistic processor, direct view optics, electronic compass (bearing, tilt, and cant), thermal sighting, and an internal display. The XM29's precision airbursting 25mm ammunition is capable of defeating not only exposed targets, but those in defilade (targets that have taken cover behind structures, terrain features, and/or vehicles), a capability lacking in current direct fire rifles and carbines.

The XM29 will provide an overmatch in system effectiveness while increasing its ability in providing effective day/night operation. It provides a significant increase in lethality for a basis of issue of four XM29s per Infantry Squad. It mitigates the aim error associated with standard KE ammunition by providing the option of firing a 25mm air-bursting projectile with a low-arc trajectory.

The XM29 will be compatible with the digital battlefield and will provide the lethality upgrade for the Objective Force Warrior. Spiral Development is being used to accelerate the fielding of both weapon subsystems separately in advance of the dual-barrel system. The XM25 is the component that provides the airbursting performance and the XM8 is the KE component of the XM29. The XM8 is currently undergoing accelerated development to allow early fielding to replace M4 Carbines and M16 Rifles.

This weapon has performance better than or equal to the M4, offers increased reliability, is configurable to meet mission requirements by easy barrel changeout, and integrates sighting and pointing/illuminating devices. Lethality modules include a 40mm grenade launcher as well as a 12-gauge shotgun module. The 40mm grenade launcher, designated the XM320, can be used in a stand alone mode or as a separable under-barrel module with the M16 Rifle, the M4 Carbine, or the XM8 Carbine. The shotgun module is also used under-barrel on the M4, M16, or XM8. Both modules are currently under development as SEP Programs.

While an M16 costs under $1000, OICW may cost $10,000. That is because OICW is a single system consisting of a fire control and combinatorial weapon. The functions contained within the system include the "add-ons" now used on the M16 or M4 such as optics, thermal weapon system, and aim light. With these functional add-ons, the existing M16/M4/203 system cost exceeds $35,000 each.

The XM29 program focused on verifying system safety and launching into the full scale engineering design of the weapon, fire control, and ammunition. The XM29 demonstrated the integrated system capability "end to end" on three different test sequences over the multiple phases of the program. These results validated that it is technically low risk to field this leap-ahead capability in shoulder-fired HEAB ammunition.

The target acquisition fire control was upgraded, primarily focusing on reducing weight by integrating the latest laser, sensor, optics, electronics, and material technologies. It incorporates improved, low-weight optics for daylight viewing and integrated thermal optics for use at night. As the lethal element of the Land Warrior, it has been designed to integrate with the Land Warrior, allowing the XM29 to communicate from the fire control to the Land Warrior heads-up display and also to accommodate power sharing between systems.

The weapon was also being upgraded with a focus on weight reduction and ruggedization. Weight optimization is the primary driver for every weapon piece part and component. The program team is evaluating alternate weapon operating principles that support weight reduction. Additional enhancements are also being made to ensure ruggedness and boresight retention between the 5.56mm barrel, 20mm barrel, and fire control.

As of 2002 initial fielding of the XM29 was scheduled for GFY08. The XM29 program has implemented a block upgrade or "evolutionary" approach to fielding the weapon system. This encompasses an "initial fielding" of a "Block 1" system, which is designed to enable insertion of future technology enhancements. This approach will expedite completion and qualification of the initial Block 1 design, while preplanning future upgrades, such as advances in sensors and electronics technologies, MEMS fuze elements, advanced composites and materials, fuel cells, Nano technologies, ceramic gun barrels, wireless connectors, and future digital technology. These enhancements will help further reduce system weight, increase lethality, improve ruggedness, and increase system reliability and effectiveness beyond the Block 1 design. As of 2002 the XM29 project schedule was aligned so the First Unit Equipped (FUE) supports the fielding of the Future Combat System (FCS). This positions the Block 1 XM29 FUE in GFY08.

The OICW will not replace all of the M16s/M4s. The current U.S. Army Basis of Issue (BOI) is 4 OICW weapon systems per 9-man squad.

ATK Integrated Defense, Plymouth, Minnesota, is the XM29 system integrator and provider of the 20mm HEAB ammunition. Brashear, LP of Pittsburgh, Pennsylvania, is responsible for the target acquisition fire control. Heckler and Koch (H&K) of Germany is the weapon system developer and manufacturer, and Omega, Columbus, Georgia, is responsible for training concept planning. This integrated team has worked together for several years, bringing the system through the concept development and proof of principle phases into the current system development phase. Recently, the program successfully passed the Milestone 1a decision, clearing the path for final development and fabrication of the initial Block 1 weapon system.

By late 2003 the XM29’s development was progressing, but it was overweight and years behind schedule. Originally, the weapon was supposed to begin production in 2005, but that date now has been pushed back to the end of fiscal year 2010. Designers struggled with the air-burst munition, and fought to reduce the weapon’s weight. The original prototype of the XM29 weighed 18 pounds, which Army officials said was too heavy. By 2010, plans call for the weight to drop to 15.5 pounds [up from an initial goal of 14 pounds].

In early 2004 it was decided to speed up development of its components as separate weapons, instead of developing the XM29 gradually. The rifle portion wasa developed as the XM8, and the grenade launcher would become the XM25 Air Burst Weapon. In addition, it was decided tha the XM25 would fire a 25mm air-bursting munition, rather than the 20mm planned for the XM29.

Following the increase of the caliber of OICW grenade launcher component from 20mm to 25mm [the same as used in the OCSW], in July 2004 it was decided to split the OICW system into two separate weapons, the 5.56mm XM8 modular assault rifle (OICW Increment 1), and the 25mm XM25 airburst assault weapon / grenade launcher (OICW Increment 2). Development of the complete XM29 (OICW Increment 3) system was shelved, and will be resumed once the OICW Increment 1 and 2 components are developed, and weight constraints of entire system are met.

TYPES OF WEAPONS

There are essentially three facets to classifying weapon types: who uses it, how it works, and what it targets.

Who uses it essentially determines how it can be employed:
-Personal weapons (or Small Arms) are designed to be used by a single person.
-Crew served weapons are larger than personal weapons, requiring more than one crew member to operate correctly.
-Fortification weapons are designed to be mounted in a permanent installation, or used primarily within a fortification.
-Mountain weapons are designed for use by mountain forces or those operating in difficult terrain and harsh climates.
-Vehicle weapons are designed to be mounted on any type of military vehicle.
-Railway weapons are designed to be mounted on railway cars, including armored trains.
-Aircraft weapons are designed to be carried on and used by some type of aircraft, helicopter, or other aerial vehicle.
-Naval weapons are designed to be mounted on ships and submarines.
-Space weapons are designed to be used in or launched from space.
How it works refers to the construction of the weapon and how it operates:
-Antimatter weapons (still theoretical) would combine matter and antimatter to cause a powerful explosion. However, antimatter is still hard to make and harder to store.
-Archery related weapons operate by using a tensioned string to launch a projectile at some target.
-Artillery are large firearms capable of launching heavy projectiles (normally explosive) over long distances.
-Biological weapons spread biological agents, attacking humans (or livestock) by causing disease and infection.
-Chemical weapons spread chemical agents, attacking humans by poisoning and causing reactions.
-Energy weapons rely on concentrating forms of energy to attack, such as lasers, electrical shocks, and thermal or sonic attack.
-Explosive weapons use a physical explosion to create blast concussion or spread shrapnel.
-Firearms use a chemical charge to launch one or more projectiles down a rifled or smoothbore barrel.
-Future weapons make use of futuristic high-tech weapon systems and advanced materials.
-Improvised weapons are common objects that were not designed for combat purposes but are used as such in self defense or a violent crime.
-Incendiary weapons rely on combustible materials and an ignition mechanism to cause damage by fire.
-Non-lethal weapons are used to attack and subdue humans, but are designed to minimize the risk of killing the target.
-Magnetic weapons is one that uses magnetic fields to accelerate and propel projectiles, or to focus charged particle beams.
-Mêlée weapons operate as physical extensions of the user's body and directly impact their target.
-Missiles are rockets which are guided to their target after launch. This is also a general term for projectile weapons.
-Nuclear weapons use radioactive materials to create nuclear fission and/or nuclear fusion detonations above a target ("air-burst") or at ground-level.
-Primitive weapons make little or no use of technological or industrial elements, instead being purely constructed of easily obtainable natural materials.
-Ranged weapons cause a projectile to leave the user and (ideally) strike a target afterwards.
-Rockets use chemical propellant to accelerate a projectile (usually with an explosive warhead) towards a target and are typically unguided once fired.
-Suicide weapons are typically explosive in nature and exploit the willingness of their operator to not survive the attack to reach their target.
What it targets refers to what type of target the weapon is designed to attack:
-Anti-aircraft weapons target enemy aircraft, helicopters, missiles and any other aerial vehicles in flight.
-Anti-fortification weapons are designed to target enemy installations, including bunkers and fortifications. The American bunker buster bomb is designed to travel almost 10 metres underground before detonating, toppling underground installations.
-Anti-personnel weapons are designed to attack people, either individually or in numbers.
-Anti-radiation weapons target enemy sources of electronic radiation, particularly radar emitters.
-Anti-ship weapons target enemy ships and vessels on water.
-Anti-submarine weapons target enemy submarines and other underwater targets.
-Anti-tank weapons are primarily used to defeat armored targets, but may be targeted against other less well armored targets.
-Area denial weapons are designed to target territory, making it unsafe or unsuitable for enemy use or travel.
-Hunting weapons are designed particularly for use against animals for hunting purposes.
-Infantry support weapons are designed to attack various threats to infantry units, supporting the infantry's operations, including heavy machine guns, mortars and pinpoint airstrikes ordered by the infantry, often to strike heavily defended positions, such as enemy camps or extensively powerful machine-gun nests.

Information Warfare

In modern warfare, since all redoubts are traps, maneuver and coordination of forces is decisive, overshadowing particular weapons. The goal of every modern commander is therefore to "operate within the observation-decision-action cycle of the enemy." In this way, the modern commander can bring overwhelming force to bear on isolated groups of the enemy, and "tactically" overwhelm an enemy.

Traditional military maneuvers tried to achieve this coordination with "fronts" made of lines of military assets. These were formerly the only way to prevent harm to friendly forces. Close-order marching and drill (a traditional military skill) was an early method to get relative superiority of coordination. Derivative methods (such as "leapfrogging units to advance a line") survived into combined arms warfare to coordinate aircraft, artillery, armor and infantry.

Computers are changing this. The most extreme example so far is the use of "swarm" tactics by the U.S. military in Iraq. The U.S. had instantaneous, reliably encrypted communications, perfect navigation using GPS and computer-mediated communications to aim precision weapons.

In swarm tactics, small units pass through possible enemy territory. When attacked they attempt to survive by calling down immediate overwhelming showers of precision-guided air-dropped munitions for armor, and cluster bombs for enemy troops. To consolidate such a region, nearby artillery begin bombardment, and ground units rush in on safe vectors through the bombardments, avoiding them by computer-mediated navigation aids.

Thus in modern warfare, satellite navigation systems, digital radios and computers give decisive advantages to ordinary military personnel armed with weapons that are otherwise unremarkable.

Combustion-Powered Weapons

Firearms are qualitatively different from earlier weapons because they store energy in a combustible propellant such as gunpowder, rather than in a weight or spring. This energy is released quite rapidly, and can be restored without much effort by the user, so that even early firearms such as the arquebus were much more powerful than human-powered weapons. They became increasingly important and effective during the 16th century to 19th century, with progressive improvements in ignition mechanisms followed by revolutionary changes in ammunition handling and propellant. During the U.S. Civil War various technologies including the machine gun and ironclad warship emerged that would be recognizable and useful military weapons today, particularly in lower-technology conflicts. In the 19th century warship propulsion changed from sail power to fossil fuel-powered steam engines.

The age of edged weapons ended abruptly just before World War I with rifled artillery, such as howitzers which are able to destroy any masonry fortress. This single invention caused a revolution in military affairs and doctrines that continues to this day. See Technology during World War I for a detailed discussion.

An important feature of industrial age warfare was technological escalation - an innovation could, and would, be rapidly matched by copying it, and often with yet another innovation to counter it. The technological escalation during World War I was profound, producing armed aircraft and tanks.

This continued in the period between the end of that war and the next, with continuous improvements of all weapons by all major powers. Many modern military weapons, particularly ground-based ones, are relatively minor improvements on those of World War II. See military technology during World War II for a detailed discussion.
The most notable development in weaponry since World War II has been the combination and further development of two weapons first used in it—nuclear weapons and the ballistic missile, leading to its ultimate configuration: the ICBM. The mutual possession of these by the United States and the Soviet Union ensured that either nation could inflict terrible damage on the other; so terrible, in fact, that neither nation was willing to instigate direct, all-out war with the other (a phenomenon known as Mutually Assured Destruction). The indiscriminate nature of the destruction has made nuclear-tipped missiles essentially useless for the smaller wars fought since. However computer-guided weaponry of all kinds, from precision-guided munitions (or "smart bombs") to computer-aimed tank rounds, has greatly increased weaponry's accuracy.